WTK17-DC-1000-1700-1900-2550-5000-35 | Wainwright Instruments

On this datasheet you can select your preferred connectors. Click Download PDF to generate a PDF document for saving or emailing. You can generate a quote request by entering a quantity in the field at the bottom of the page and clicking Add to Quote Basket. When done selecting filters, please click Quote Basket at the top of the page and fill in the contact form. Before sending us the quotation request you will be able to make adjustments to the quantities or remove items. A copy of your request will be sent to you via email.

Data Sheet: Triplexer (LP/BP/HP)

This Triplexer is made up of a lowpass section, a bandpass Section and a highpass section. The lowpass section has a passband from DC to 1000 MHz, with an insertion loss of 0.4 dB max. and an isolation of at least 35 dB. The bandpass section has a passband from 1700 to 1900 MHz, with an insertion loss of 0.7 dB max. and an isolation of at least 35 dB. The highpass section has a passband from 2550 to 5000 MHz, with an insertion loss of 0.7 dB max. and an isolation of at least 35 dB.

Currently not available

Specifications

Typical Performance

17 Section LC Design

picture currently unavailabe

Technical drawing

drawing currently unavailabe

Connector Options:

SMA - Female

	Band 1 (Low Pass)	Band 2 (Band Pass)	Band 3 (High Pass)
Passbands	DC to 1000 MHz	1700 to 1900 MHz	2550 to 5000 MHz
Insertion Loss	0.4 dB max.	0.7 dB max.	0.7 dB max.
Return Loss	14 dB min.	14 dB min.	14 dB min.
Stopbands	1700 to 5000 MHz	DC-1000 & 2550-5000 MHz	DC to 1900 MHz
Stopband Attenuation	35 dB min.	35 & 35 dB min.	35 dB min.
Operating Temperature	15 °C to 45 °C
Power Handling	max. 10 W CW into a 2:1 VSWR (See our warranty)
Dimensions (L x W x H)	max. 96 x 65 x 13.2 mm (connectors may protrude)
Approx. Weight	0.21 kg
Mounting Provision	5.5 mm flanges on both ends with 2.1 mm holes
Connector Common	Please choose Connector common
Connector 1	Please choose Connector 1
Connector 2	Please choose Connector 2
Connector 3	Please choose Connector 3