WRCD20-1700-2000-5-1-40-3300-QUOTE | Wainwright Instruments

On this datasheet you can still adjust your Fo and select your preferred connectors Click Download PDF to generate a PDF document for saving or emailing. You can generate a quote request by entering a quantity in the field at the bottom of the page and clicking Add to Quote Basket. When done selecting filters, please click Quote Basket at the top of the page and fill in the contact form. Before sending us the quotation request you will be able to make adjustments to the quantities or remove items. A copy of your request will be sent to you via email.

Data Sheet: Band Reject / Notch Filter for W-CDMA DL Band 25 (1930-1995 MHz)

WRCD20-1959-1960-1965-1966-40SS is a Band Reject / Notch Filter that is manufactured using a 20 section Cavity Design. It has a bandwidth of 5 MHz, with maximum insertion loss of 2 dB in its passbands and maximum 4 dB at its passband corners. It has maximum slopes of 1 MHz, achieves an attenuation of at least 40 dB in its stopband and has a passband limit of at least 3300 MHz. This Band Reject / Notch Filter's center frequency (Fo) has been pre-selected to match W-CDMA DL Band 25 (1930-1995 MHz). However, you may adjust the Fo within the below stated range, without affecting the other guaranteed specifications or the price. Please click the update button to update the model number.

Attenuation 40 dB min. Currently not available

Specifications

Typical Performance

20 Section Cavity Design

Technical drawing

Typische Leistung – Wainwright Instruments

Connector Options:

SMA - Female
SMA - Male
N - Female
N - Male
BNC - Female
BNC - Male

Passband
Insertion Loss	2 dB max. (4 dB max. at Corners)
Return Loss	14 dB min. (VSWR 1.5:1 max.)
Stopband	choose Fo between 1700 and 2000 MHz
Stopband Attenuation	40 dB min.
Operating Temperature	15 °C to 45 °C
Power Handling	will be quoted on request (See our warranty)
Dimensions (L x W x H)	max. 405 x 300 x 82 mm (connectors may protrude)
Approx. Weight	14 kg
Mounting Provision	15 mm flanges on both ends with 5.2 mm holes
Connector 1	Please choose Connector 1
Connector 2	Please choose Connector 2